Sound Adjust; Sound Settings; Optical Out - JVC LT-32E488 User Manual

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.
Bass – You can increase or decrease the level of low-frequency sound in the TV's audio with
the bass adjustment.
Treble – Use treble to adjust the level of high-frequency sound in your TV's audio.
Balance – Adjust the level of sound between the TV's left and right speakers with the balance
setting.
Adjust the Sound Settings
Press the M
To "Sound Adjust"
π †
è
To enter
To "Bass", "Treble" or "Balance"
π †
√ ®
To adjust the setting
To move to the next setting
π †
Press the M
Notes:
• You can reset all sound adjustments you set at once as the default setting when you select
reset. See page 49.

Optical Out

You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects
digital channels.
Press the M
To "Sound Adjust"
π †
è
To enter
To "Optical Out"
π †
è
To select "PCM" or "DOLBY DIGITAL"
Press the M
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
• You cannot output sound from your Optical Output connection if the audio source is from your
HDMI device.
50
button
ENU
button when finished
ENU
button
ENU
button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
Sound Adjust
Bass 0
Treble 0
Balance 0
Optical Out
Turn On Volume
Volume Limit
BACK
Select Operate Back
Sound Adjust
Bass 0
Treble 0
Balance 0
Optical Out
Turn On Volume
Volume Limit
BACK
Select Operate Back
PCM
Current
30
Reset
MENU
Exit
PCM
Current
30
Reset
MENU
Exit