JVC LT-32A1 Instructions

WIDE LCD PANEL TV INSTRUCTIONS
LT-32A1
© 2010 Victor Company of Japan, Limited
Safety Precautions
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding setup! • Never insert the power cord by wet hand!
- Connect only to a 110-240 V, 50/60Hz AC outlet. - It may cause a fatal electric shock.
• Make enough room for inserting and removing the power • Keep the TV set away from direct sunlight!
plug! - TV set can be damaged.
• Place the TV as close to the outlet as possible! • Place the TV set in a neat and dry place. Do not place the
product close to source of steam, heat, moisture or oil.
- The main power supply for this TV is controlled by inserting or removing
the power plug. Because it may cause a fire hazard or electric shock hazard!
• Never cut or damage the power cord! • Don't touch an external metal part of the TV set!
- If the AC plug is not the right shape, or the power cord is not long
- It may cause an electrocuted.
enough, use an appropriate plug adapter or extension cable. (Consult • For keep a distance from potential ignition
your retailer)
sources to the components or part in side TV
• Unplug the power cord when going out!
set, customer should install TV set with a stand
- The power buttons on the remote control and the TV unit cannot
within ± 10 perpendicularly degree.
completely turn off the TV. (Make appropriate arrangements for
• Never dismantle the rear panel!
bedridden people.)
- It may cause an electric shock.
• Do not allow the TV to fall!
• Never obstruct the ventilation holes!
- Do not rest your elbows on, or allow children to hang from the TV.
- It may cause overheating or a fire.
- There is a risk that the TV will fall and cause injuries.
• Handle LCD panel with care!
- Make use of the hole on the back of the stand to prevent
- Use a soft, dry cloth when cleaning.
the TV from falling easily.
• If the TV is damaged or behaving strangely, stop • Never try repair the TV yourself!
- If the problem cannot be solved in "Troubleshooting" unplug the power
using it at once!
cord and contact your retailer.
- Unplug the power cord and contact your retailer.
• If a television is not positioned in a sufficiently stable
• Never place anything on the TV!
location, it can be potentially hazardous due to falling. Many
- Placing liquid, naked flames, cloths, paper, etc. on the TV may cause a
injuries, particularly to children, can be avoided by taking
fire.
• Never expose to rain or moisture! simple precautions such as:
- To prevent fire or electric shock, never allow - Using cabinets or stands recommended by the manufacturer of the
television.
liquids to enter the unit.
• Never insert objects into the cabinet - Only using furniture that can safely support the television.
- Ensuring the television is not overhanging the edge of the supporting
openings!
furniture.
- It may cause a fatal electric shock.
- Not placing the television on tall furniture (for example, cupboards or
- Take care when children are near.
bookcases) without anchoring both the furniture and the television to a
• Hold the TV so as not to scratch the
suitable support.
screen!
- Not standing the television on cloth or other materials placed between
- Do not touch the screen when carrying the TV.
the television and supporting furniture.
• Do not carry the TV on your own!
- Educating children about the dangers of climbing on furniture to reach
- In order to prevent accidents, ensure that the TV
the television or its controls.
is carried by two or more people.
• To prevent accidents, firmly attach the TV stands to the TV
shelf before using microphone.
• For more details on installation, usage and safety ➔ Consult
• Make sure that the subwoofer is in good condition before
your retailer.
installing it on the TV.
- If the subwoofer has leakage current, it may damage the TV or cause
electric shock.
Care when setting
Power requirements • If the microphone is installed,
■
200 mm
• Connect the power cord should be lock it's cable follow
only to a 110-240V, 50/60Hz picture.
AC outlet.
Installation requirements
■
• To avoid overheating,
ensure the unit has ample
150 mm 50 mm 150 mm 50 mm
room.
* Please see how to set up the TV and connection in GGT0356-001A-H.
Using the TV's Menu ---> Area - 2
Picture Mode Select the picture as you like. (Standard / Soft / Bright) On Timer
Backlight Darker <--> Brighter
Picture
Lower <--> Higher
Brightness Darker <--> Brighter
Sleep Timer
Detail Softer <--> Sharper
Channel Guard Stop children from watching specific channels.
Color Lighter <--> Deeper
Blue Back
Tint Reddish <--> Greenish *Only NTSC
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Child Lock
Features Finer picture adjustment
Auto Shutoff
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR Reduces the amount of noise in original
picture. (Off / On)
Favorite Setting Delete the favorite channel that you registered by
Color Management For natural - looking pictures. (Off / On)
Power Lamp
Picture Management Fix bright / dark pictures. (Off / On)
Dynamic Backlight Reduces the brightness of the backlight Eco Mode
when the screen is dark. (Off / On)
Color System Select an appropriate color system.
Auto Program Automatically registers channels.
(Auto / NTSC 3.58 / PAL-M / PAL-N)
Channel
Zoom Change the aspect ratio.
Summary
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
MTS Select the stereo and SAP broadcasted programs.
(Stereo / SAP / Mono)
Sound Meister Set sound theme to match your listening source.
(Off / Dynamic / Pure / Living)
Bass Compensates low frequencies to widen the
Language
frequency band. (Weaker <--> Stronger)
Video-2 Setting Switch between video and component signal.
Treble Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Rocket Start
Surround Expands the stereo sound naturally.
(Narrower <--> Wider)
Balance Left Stronger <--> Right Stronger
Closed Caption Select the desired caption or text channel.
Voice Enhancer Uses sound enhancement technology. (Off / On)
Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out Chooses to connect subwoofer. (Off / On)
Subwoofer Level Adjusts sound level of your subwoofer.
(Lower <--> Louder)
• When Subwoofer Out set to On, you can adjust
Subwoofer Level.
Karaoke You can enjoy to reduce the vocals for your own karaoke.
Karaoke Chooses to reduce the vocals.
HDMI Setting Setting for HDMI input. (Size / Audio)
(Off / Mode-1 / Mode-2) PC Setting
Main Volume Adjusts volume level. (Lower <--> Louder)
Microphone Volume Adjusts volume level of microphone.
* Please see CH/CC List in GGT0356-001A-H.
(Lower <--> Louder)
Useful functions
Channel Guard : Karaoke :
Stop children from watching specific channels.
1 1
Select "Channel Guard" Select "Karaoke"
1. Select a number
Features Sound
0
> Set ID No. 2. To the next column
Karaoke
O K
Karaoke
0 0 0 0
3. Set
Main Volume
Microphone Volume
2 Karaoke
Select a channel and lock it ( : locked)
Lock / Release
1. Select a
Features
(Blue)
channel
>> Channel Guard
PR ID CH / CC
OK
01 SAT CH 02
02 – – – – – – CH 05
03 BBC CH 47
04 IEEE CH 09
05 APL CH 11
06 DANY CH 07
07
Main Volume
08
09
Microphone Volume Adjusts volume level of microphone.
10
• View a locked channel by use the numerical buttons to enter the channel
number. When appeare, press "Display" button and enter your "ID No."
• Microphone Volume is available when plug in microphone.
Subwoofer out : • Microphone to be used with the "
You can enjoy subwoofer sound from Subwoofer out.
be of "HIGH GRADE LOW NOISE MICROPHONE CABLE" type;
1
Select "Subwoofer Out"
otherwise, noise will result.
Freeze :
1. Select
Sound
Stereo / I II I II Mono
Sound Meister 2. Adjust
OK
O K 1
Balance
Voice Enhancer 3. Finish
Off
AI Volume
Off
Subwoofer Out On
Subwoofer Level
Karaoke
Chooses to connect subwoofer. (Off / On)
• You cannot save or export the snapshot.
• When Subwoofer Out set to On, you can adjust Subwoofer Level.
• Freeze function is not available for HDMI, PC and Component signal.
• Subwoofer to be used must have a built-in amplifier.
ENGLISH
Remote control buttons and functions
20
Clear SD
2 3
1
ZOOM
4
19 5 6
ECO
7 8 9
+
RETURN KARAOKE
18 0
TV/VIDEO MENU
17
GGT0353-001A-H
OK
0610GLT-NF-MT
DISPLAY BACK
16
CH VOL
15
MODE
14
RM-C2022
LCD
10 10
Plane Favourite channel setting.
1. Register the favourite channel
Press and hold
Programmed! will be displayed.
• Insert the batteries
Use two "AAA/R03" dry cell batteries.
Insert the batteries from the · end,
making sure the · and ª polarities
are correct.
WARNING:
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
Initial Settings
1
Turn on the TV.
• To prevent the TV from falling thread the
belt through the hole on the back of the
JVC logo appears
stand and secure it to the TV rack.
• Show only when powering on for the first time.
Hole for belt
• The power on the unit can also be used.
• The select the new Country Area after Initial Setting has completed.
Belt
(not provided)
Screw (not provided)
1
Useful functions (continued)
Eco Mode :
Adjusts picture contrast according to the brightness of your room to reduce power consumption.
Turns on the TV from standby mode.
Off : Deactivates the function
CH Select a channel. (Air : CH02 - CH69 ,
Cable : CC01 - CC125) Eco-1 : Picture is darkened for the 1st level.
On Timer Set a time. (00:00 - 12:00)
Eco-2 : Picture is darkened for the 2nd level (more than the 1st level).
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house
works at the same time).
Display a blue screen and mute the sound when the
- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.
signal is weak or absent. (Off / On)
- When you want the picture to appear again, press any button on the remote control then function will be reset back to "Off".
Disables the side control buttons of the TV. (Off / On)
- After unplugging the TV or press "Power off" button, this function will be reset back to "Off"
Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
Viewing Teletext
minutes. (Off / On)
(Blue) .
You can watch the Teletext broadcast channel with Text Functions.
Sets power lamp lighting while the TV is on. (Off / On)
Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco) 1
TV mode <--> TEXT mode
2
Select a Teletext page by press number button (0-9).
Skip
(Red)
Skip the channel by .
• Move up or down a page by CHANNEL +/-.
Cancel (Green)
Cancel the skip channel by .
List Mode : Book mark your favourite page.
ID (Yellow)
Edit a channel name by .
MODE
• Channels are to be skipped cannot be selected by
the CHANNEL - / + button.
• The skip can be set to all channels of Air (CH02 -
CH69) and Cable (CC01 - CC125).
Select your desired on screen display language.
• Recall your favourite page by press the colour button.
Hold : Hold the current page.
(Video / Component)
• Cancel by press this button again.
TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
Reveal : Display hidden information.
standby mode will more than normal standby mode.
• example : answer to a quiz, etc
Size : Double the size of the displayed text.
Closed Select to view close caption or text
Caption information. (Off / CC / Text)
Index : Returns to page "100" or a previously designated page.
Caption Select the desired caption.
(CC1 / CC2 / CC3 / CC4) Cancel : Leave the current page open, while you switch to watch TV.
Text Select the desired text channel. • Useful when running a page search.
(T1 / T2 / T3 / T4)
Sub-page : Display the number of Sub-page.
• Closed Caption is not available for component
• Cancel by press this button again.
signal.
Troubleshooting
Setting for PC input.
(Auto / PC Position / Phase / Pixel)
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Severe noise or snow
Check the aerial cable and TV connections .
Check the direction of the aerial.
Check the aerial or its cable damaged or not.
You can enjoy to reduce the vocals for your own karaoke.
Patterns, stripes or noise
Interference caused by devices such as an amplifier, personal computer,
or a hair drier, Move it away from TV.
1. Select
Ghosting (Doubling of images)
2. Adjust
O K
Interference occurs caused by signal reflection from mountains or building.
Off
3. Finish
Try to adjust the aerial's direction or use another antenna.
Cannot turn it on
Chooses to reduce the vocals.
Ensure the power cord is connected to the AC outlet correctly.
Off : Normal sound of song
Cannot operate the remote control.
Mode-1 : Only sound of music
The batteries may be exhausted. Replace with new batteries.
Mode-2 : To sing, accompanying with sound of song
Ensure that you are operation the remote control at less than 7 meters
• Karaoke function works only for stereo sound system.
from the front of your TV.
• If using Karaoke disc, users must choose to remove the
vocals from the player. Remote control stops working
Unplug TV, several minutes later plug it in again.
Adjusts volume level. (Lower <---> Louder)
Side control buttons do not work
(Lower <---> Louder) Switch "Child Lock" to "Off".
Aspect ratio changed unintentionally
Karaoke" function of JVC must
Press " ZOOM " button to return to your settings.
PC screen alignment is off
Adjust the "PC Position" in "PC Setting" of Set Up menu.
Take snapshots of the screen.
Blue screen appears on the screen
Switch "Blue Back" to "Off".
Cancel
Strange picture when using an external device
Press " " again,
OK If the top of the image is distorted, check the video signal quality itself.
or change the
If movement appears unnatural when receiving a signal from a DVD
Freeze
channel.
player, etc. with 625p (progressive-scanning), change the output setting of
still picture
the external device to 625i (interlace-scanning).
4
Adjust Volume
1 Power On / Off # Volume control / Turn off muting
[ For button side front will be displayed on-screen menu
VOLUME VOLUME 2 Colour buttons
12 • When press and hold the button for 3 seconds,
3 Turn on "Clear SD"
on-screen menu will be displayed.
4 Turn on "Zoom"
• To exit, press and hold the button again for
5 Turn on "Eco Mode"
15
3 seconds. ]
CHANNEL CHANNEL
6 Turn on "Karaoke"
$ Function for viewing Teletext
7 Favourite channel setting
5 % To Teletext
8 Display on-screen menu
6 & Change channel / Page / Hyper Scan
9 Operate the menu
( Channel information
7
1
! To previous screen
) Switch between TV / Video input
8
" Turn on "Sound Meister"
~ Return Plus / Return function
+ Change channel / page
9 Microphone
, Turn the volume off / on
10
Zoom : Change the aspect ratio V-Scroll
11
•
1. Select
12
Picture
Zoom 16:9 Zoom
OK
•
Auto Panoramic
13
Regular 2. Set
Panoramic
14:9 Zoom
Move the picture with 3 or 4
16:9 Zoom
16:9 Zoom Subtitle
while this bar is displayed.
Full
Hyper Scan :
CH
Press and hold . PR changes without changing the picture screen.
Once you release the button, the picture of the selected PR will appear.
Return Plus : Return to the frequently viewed channel.
Return Plus Programmed by select the frequently viewed channel then press and hold
RETURN+
Return Plus Canceled by press and hold .
Return : Return to the previously viewed channel.
2. Recall the favourite channel
Press number
Set 1-4 ? Favourite 1-4 ?
button (1-4 only)
Press
• If the favourite channel has not been registed then " No memory " will
be displayed.
"AAA/R03"
WARNING:
Batteries
Batteries shall not be exposed
to excessive heat such as direct
sunshine, fire or the like.
2 3
Select a language. Select Country Area.
ME NU
Set Up 1. Select
> Language > Country Area
English ไทย Area - 1
Tiếng Việt OK Area - 2
Português
Français Melayu 2. Set
Українська Pусский
Castellano
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
(While the cursor is pointing to Picture menu
1
and hold for 3 seconds.)
Watching Video or DVDs
1
Select the input source.
AV Select
0 01
1 Video-1
2 Video-2
3 HDMI
4 PC
• Operate the connected device and play video.
(Red) (Green) (Yellow) (Blue)
2
for select to save Select "Set Up" Menu.
Press number button
HDMI setting : Setting for HDMI input.
for enter the number
save
Size : Auto / 1 / 2
of page.
If wrong screen size appears in 480p (525p),
change to "1" or "2".
Audio : Auto / Digital / Analogue
If no sound, change to " Analogue " or " Digital".
PC Setting : Setting for PC input.
Auto : Automatic adjust by 2.
PC Position : Adjust screen position by 3 / 4.
And set by
Phase : Sets the focus of screen.
Pixel : Adjusts the horizontal feature of screen.
Poor picture quality
Unnatural colour >> Adjust "Colour" and "Backlight".
Check "Colour System". If "Auto" is selected.
Select the specific colour system manually.
Poor sound
Adjust the "Bass" and "Treble".
If receiving a poor signal in "Stereo/I
■
Adjust the channel reception using "Manual".
For HDMI signal, wrong screen size.
Switch "Size" in "HDMI Setting" to "1" or "2".
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format for
an "HDMI" device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or
"Analogue" or "Auto" for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu do
not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fine dots ("pixels") to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUTPUT terminal.
Subwoofer, No sound
May be signal source is not low frequency bass signal.
Check subwoofer cable connected correctly.
Feedback sound symptoms
Keep the microphone away from the TV's speakers.
Echo
Lower the sound level in "Microphone Volume" in order to prevent the echo.
Initial Settings (continued)
If you select Country Area to "Area-1"
4
Select the teletext language group.
1. Select
Set Up
> Teletext Language
Group-1 OK
Group-2
Group-3
Group-4
Group-5
5
Automatically register channels (Auto Program).
Set Up
OK
> Auto Program
CH 40
5%
6 Check what was registered.
When 720p or 1080i or 1080p signal
is received, "Full" and "Slim" can be OK
Set Up
> Edit
selected.
PR ID CH / CC
01 – – – – – – CH 02
In PC mode, "Regular" and "Full" can
02 – – – – – – CH 03
03 B B C A B C CH 47 • If you want to edit channel, follow Edit
be selected.
04 A B C D E F CH 76
05 – – – – – – CH 12 function in Set Up menu.
06 – – – – – – CH 09
07 – – – – – – CH 05
08 – – – – – – CH 02
09 – – – – – – CH 15
10 – – – – – – CH 28
Using the TV's Menu ---> Area - 1
Display MENU.
Picture
Picture Mode
Backlight
Contrast
RETURN+
Brightness
.
Sharpness
Colour
Tint
White Balance
Features
or Exit from Menu. Confirm after setting.
OK
• Please see "Menu operation guide" at the bottom of menu on-screen.
Picture Mode Select the picture as you like. (Standard / Soft / Bright)
Backlight Darker <--> Brighter
Press number Contrast Lower <--> Higher
button (1-4 only) Brightness Darker <--> Brighter
Sharpness Softer <--> Sharper
Colour Lighter <--> Deeper
Tint Reddish <--> Greenish *Only NTSC
White Balance Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR Reduces the amount of noise in original
If this symbol is shown, picture. (Off / On)
Colour Management For natural - looking pictures. (Off / On)
it is only valid in the
Picture Management Fix bright / dark pictures. (Off / On)
European Union.
Dynamic Backlight Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Colour System Select an appropriate colour system.
(Auto / PAL / SECAM / NTSC 3.58 / NTSC
4.43 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
Stereo / I II
Select the stereo, mono or bilingual language.
■
(I / II / O / m / Mono)
Sound Meister Set sound theme to match your listening source.
(Off / Dynamic / Pure / Living)
Bass Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Treble Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Surround Expands the stereo sound naturally.
(Narrower <--> Wider)
Set Up 1. Select
Balance Left Stronger <--> Right Stronger
Voice Enhancer Uses sound enhancement technology. (Off / On)
OK Al Volume Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out Chooses to connect subwoofer. (Off / On)
2. Set
Subwoofer Level Adjusts sound level of your subwoofer.
(Lower <--> Louder)
• When Subwoofer Out set to On, you can adjust
Subwoofer Level.
Karaoke You can enjoy to reduce the vocals for your own karaoke.
Karaoke Chooses to reduce the vocals.
(Off / Mode-1 / Mode-2)
Main Volume Adjusts volume level. (Lower <--> Louder)
Microphone Volume Adjusts volume level of microphone.
(Lower <--> Louder)
2
Technical information
Sound and Colour system in your country or region
Area Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
Asia, India, etc.
China, Vietnam, etc.
Middle
East Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Europe
Germany, Holland, Belgium, etc.
UK, etc.
1. Select
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
OK
Africa Nigeria, etc.
2. Set
Egypt, Morocco, etc.
Agentina, Paraguay, Uruguay
South Brazil
America Chile, Peru, Bolivia, Colombia, Venezuela,
Ecuador, etc.
PC Signals that can be displayed
• If the signal doesn't appear, check that the vertical frequency on the PC is
set to "60Hz".
Resolution 640 x 480 (VGA) / 1024 x 768 (XGA)
Vertical frequency
* Machintosh* computers are not supported.
OK .
(Machintosh is a registered trademark of Apple Computer, Inc.)
Specification
Main unit
Area-1 B / G / I / D / K / M / N
Broadcasting systems
Area-2 M / N
Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
Colour systems PAL-M / PAL-N
Area-2 NTSC 3.58 / PAL-M / PAL-N
VHF low channel (VL) = 46.25 to 140.25 MHz
II" switch to "Mono".
Area-1 VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Channels and VHF low channel (VL) = 55.25 to 127.25 MHz
frequencies Area-2 VHF high channel (VH) = 133.25 to 361.25 MHz
UHF channel (U) = 367.25 to 801.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex NICAM (I / B / G / D / K ), A2 (B / G / D / K)
systems MTS (Multi-channel Television Sound)
Teletext systems FLOF (Fastext), WST (World System Teletext)
Power requirements AC 110 V - 240 V, 50/60Hz
Audio output
6 W + 6 W
(Rated power output)
Speakers (4 cm x 16 cm) x 2
Power consumption
[standby]
[0.7 W]
["Rocket Start" mode
standby]
Screen size
(visible area size
measured diagonally)
Dimensions
791.8 x 571.7 x 203.5
(W x H x D: mm)
[791.8 x 520.5 x 103.9]
[without stand]
Weights
[without stand]
Power cord x 1
Remote control unit : RM-C2022 x 1
Accessories
AAA/R03 dry cell battery x 2
Screw x 8
5
If you select Country Area to "Area-2"
4
Select Air or Cable.
1. Select
Set Up
OK
> Auto Program
2. Set
Air
Cable
5
Searching for the channels (Auto Program)
Set Up
>> Auto Program
CH 40
5%
6 Check what was registered.
OK
Set Up
> Channel Summary
CH / CC ID Skip
CH 02 – – – – – –
CH 03 – – – – – –
• If you want to set undesired channels
CH 04 B B C A B C
CH 05 A B C D E F
to be skipped, follow Channel Summary
CH 06 – – – – – –
CH 07 – – – – – –
CH 08 – – – – – – Yes function in Set Up menu.
CH 09 – – – – – – Yes
CH 10 – – – – – –
CH 11 – – – – – –
2 / 3 Select Main menu.
(Picture / Sound / Features / Set Up)
5 / ∞ Select sub menu.
Soft
2 / 3 Change setting.
When 3 is shown.
3 Display function setting.
5 / ∞ Select function.
Warm
2 / 3 Change setting.
On Timer Turns on the TV from standby mode.
PR Select a channel. (01 - 99)
On Timer Set a time. (00:00 - 12:00)
Sleep Timer Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Channel Guard Stop children from watching specific channels.
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Child Lock Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
minutes. (Off / On)
Favourite Setting Delete the favourite channel that you registered by
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
Auto Program Automatically registers channels.
Edit / Manual Move Move a channel position by 2 and Adjust
by 3 / 4.
ID
Edit a channel name by
Insert (Green)
Insert a channel by .
Select a CH/CC by 3 / 4.
Enter number by 0-9 buttons.
Delete (Yellow)
Delete a channel by .
Manual
Register a new channel by
Beginning channel search by
(Yellow)
Channel fine tunning by
If the picture or sound is unnatural by
for select a system.
Language Select your desired on screen display language.
Video-2 Setting Switch between video and component signal.
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
• When Rocket Start is On, power consumption at
standby mode will more than normal standby mode.
Teletext Select Teletext language group.
Language (Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting Setting for PC input. (Auto / PC Position / Phase / Pixel)
What is "Clear SD"
LCD picture is unstable due to a large number of signal noise. Such noise
System System
appears extensively especially when an LCD displays SD signals. Clear SD
mode resolves disadvantage for better picture quality.
B/G
PAL
D/K
I
B/G SECAM
M NTSC
SECAM
D/K
No use "Clear SD" Use "Clear SD"
No use "Clear SD" Use "Clear SD"
B/G PAL
Connect "DVI" devices
I
B/G PAL
Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable.
I
PAL
Connect analogue sound output of the DVI device to L and R terminals in
B/G INPUT VIDEO-2.
SECAM
• Set "Audio" in "HDMI Setting" to "Analogue" or "Auto".
N
PAL
M
Language group for Teletext
M NTSC
Group Languages
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Greek, Swedish, Finnish
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
German, French
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
60.0
Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Swedish, Finnish
Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,
Finnish
• If the characters are unreadable. ➡ Select different Teletext language
group.
Terminals / Connectors
Terminal name Terminal type Signal type (IN)
VIDEO-1 RCA connectors x 3 Composite video, Audio L/R
RCA connectors x 5 Composite video, Analogue
component 480i (525i) / 576i (625i),
Progressive : 480p (525p) / 576p
VIDEO-2 (625p),
HD : 720p (750p) / 1080i (1125i) /
1080p (1125p)
Audio L/R
HDMI connector x 1 HDMI 480i (525i) / 480p (525p) /
Input
576i (625i) / 576p (625p) / 720p
terminals HDMI
(750p) / 1080i (1125i) / 1080p
(1125p)
PC INPUT D-SUB (15 pins) x 1 Analogue PC signal
HDMI Analog /
DVI Analog / PC RCA connectors x 2 Audio L / R
Audio
mini-jack x 1
Microphone (3.5 mm in Microphone input
diameter)
105 W
• HDMI Analog / DVI Analog / PC Audio use terminal common with
[16 W] VIDEO-2.
• We may change the design and specifications without notice.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
80 cm
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
15 kg
[12 kg]
(Blue)
.
(Red)
.
(Blue)
.
(Red) (Green)
and .
(Blue)
and .
(continued)
3
6