Table of Contents
Advertisement
Adjust the volume
Press the VOLUME
The volume indicator appears and the volume changes as
you press the VOLUME
Muting the sound
Press the muting button to turn off the
sound.
Pressing the muting button again restores the previous
volume level.
Watch images from external equipment
Use the INPUT button:
Press the INPUT b utton to choose an VIDEO
terminal.
TV mode
EXT modes
Last
Programme
VIDEO-1
number
PC
PC
In the PC mode:
If following message appears, the power lamp blinks in
amber and the TV goes in to reduced power mode.
- "NO SIGNAL"
- "CABLE NO INSERT"
- "OUT OF RANGE"
See "Troubleshooting" on page 25 for detials of this messages.
MTS (Muti-Channel Television Sound)
MTS technology allows severial audio signals to be broadcast
at once, giving you a choice in what you wish to hear with a TV
program. In addition to mono or stereo sound, an MTS broadcast
may also include a second audio program(SAP).
Press MTS button to switch STEREO/SAP/MONO.
• Keep the TV in stereo mode to get the best sound quality. The
sound will work in stereo mode even if a certain broadcast is in
mono sound only.
• Choose the mono setting to reduce excessive noise on a certain
channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack,
if one is available.
• MTS unavailable if your television's input source is in VIDEO-1,
VIDEO-2.
buttons to adjust the volume.
buttons.
VIDEO-2
Remote control buttons and function
Displaying the source information
You can display the source information on the screen.
Press the DISPLAY button to display the
source information.
Pressing the DISPLAY button
follows:
01
STEREO
TV
TV
or
or
VIDEO-1
EXT
EXT
Signal source
Signal source
• The source information switched by DISPLAY button.
• The source type :
TV/VIDEO-1/VIDEO-2/PC
changes the display as
No Display
No Display
11
Advertisement
Table of Contents
