Alarm Settings (Handset Only) - VTech CS6147 User Manual

7.2

Alarm Settings (Handset only)

You can use this phone to set an alarm clock. When an alarm is set, the
on the screen. When the alarm time is reached, the
screen ringing with the alarm melody for a duration of 45 seconds. You can press any
key to disable the alarm. If snooze function is activated, the alarm will sound again at
the end of the snooze period of seven minutes.
NOTES:
a. Key press is still applicable if handset keypad is locked and when the alarm time is
reached.
b. The alarm volume level is the same as the settings of the handset ringer volume. If
the handset ringer is set to OFF, the alarm still sounds at VOLUME 1 level.
c. During an external call or an internal call, if an alarm is set and when the alarm time
is reached, the
from the earpiece to notify user the alarm time is reached. Once user press any key
or press and hold
d. During paging or ringing, the alarm will not sound when the alarm time is reached.
However, if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that it's not ringing or in paging mode at the end of the
snooze period.
7.2.1 Turn on/off the Alarm
1. Press and
2. Press and
3. Press to confirm.
NOTE:
If ON is selected, you are prompted to set the alarm time.
7.2.2 Set the Alarm Time (if the Alarm is set to be ON)
1. Follow Steps 1 to 3 in section 7.2.1.
2. Enter the alarm time.
3. Press to set the snooze function.
4. Press and
5. Press to confirm.
and "ALARM ON" will still flash. An alarm tone will be emitted
to disable the alarm, it will revert to the call duration screen.
/ to select ALARM.
/ to select ON or OFF.
/ to select ON or OFF.
and "ALARM ON" flash on the
35
displays