Sharp MX-5112N Sales Manual page 43

M X - 5 1 1 2 N / M X
M X - 5 1 1 2 N / M
Blank Page Skip (Copy/Scan)
Deleting the blank pages that might be mixed in the original enables reduction of communication time and data
volume. MX-5112N / MX-4112N can execute "Blank Page Skip" from the document glass, too.
A
B
C
Original (Sheet B is a blank page.)
Rotate Back Face 180 Degrees (2-side to 1-side)
The conventional models can set "Binding Change" if they want to rotate back face 180 degrees at the time of
1-side to 2-side, and of 2-side to 2-side. MX-5112N / MX-4112N can set "Rotate back face 180 deg"at the time
of 2-side to 1-side in addition to 1-sided to 2-side and 2-side to 2-side.
A3 Full Bleed (Upgraded!)
When users copy an entire A3 size original at full size with no image cut-off at the edges, A3 wide size paper is
used. When they use this feature, they have to install the optional right exit tray and/or finisher to the MFP.
MX-5112N / MX-4112N can output the A3 wide paper into the centre tray, i.e. they don't need to install the
optional right exit tray and/or finisher.
Other Upgraded Features
No. Items
1 Multi Shot (8 in 1)
Print only cover page at
1-up at the time of
2
executing Multi Shot
feature
3 Original Count
Extended Multi-Page
4
Enlargement
5 Job Build
Stop copy when no
6 original (supported by
Soft-SW)
- 4 1 1 2 N S a l e s G
X - 4 1 1 2 N S a l e s G
Message:
3 pages of original have been
scanned (P.3)
Scan
Copy/Scan 2 pages of originals.
Execute the job?
Explanation
Added 8 in 1 into the Multi shot feature.
Only cover page is printed at 1-up when
users use the multi shot feature. This is
enabled by combining the Multi Shot
feature and Covers/Inserts feature.
"Original Count" is available when copying
data from the document glass, too.
Supports enlargement from A system to B
system, and B system to A system.
Users can change the setting for each batch,
for example number of copies, or colour/
B/W setting.
When no original is set on the document
glass/document feeder, copy operation is
stopped.
u i d e
u i d e
[Cancel] [Execute]
Conventional
Models
MX-5112N/
MX-4112N
Cancel job
Cancel
Send two sheets
Execute
of paper
Conventional Model Specification
Max 4 in 1.
Combination between Multi Shot
feature and Covers/Inserts feature is
not available.
"Original Count" is available only
when copy is fed through
document feeder.
Supports A system to A system, and
B system to B system.
Only one copy setting can be used.
Not available.
43