Safety Precautions - HP StorageWorks XP10000 Disk Array Site Prep Manual

Safety precautions

CAUTION:
Be very careful when handling the equipment. Do not drop the equipment from a
height of more than 0.5 cm (0.2 in). Floor unevenness must be less than 1 cm (0.4 in).
WARNING!
The equipment frames are very heavy. To avoid injury, use appropriate lifting tools
and have three people unpack and move the equipment.
CAUTION:
Any movement of the equipment by forklift should be done prior to unpacking. The
carton assembly provides the most secure support of the equipment during movement.
Transporting the equipment by forklift after the packaging carton has been removed is
not advisable.
CAUTION:
Equipment racks are top heavy
and contain very sensitive electronic and mechanical
components. When moving on frame casters, the rolling surface must be able to
support the equipment weight and must be free of surface conditions that could cause
shock or vibration to the cabinet contents. Avoid pushing the racks from behind
because they may tip over. Instead, pull the racks from the front to roll them. Be careful
when pulling the rack that it doesn't tip toward you or fall on you, causing injury.
WARNING!
When using sharp objects or cutting tools, make sure that no part of your body lies in
the path of the blade bit or point.
CAUTION:
When disk array equipment is not located in a data center or computer room, it
must be stored in a controlled area that meets environmental requirements (see
"Environmental requirements").
62
Delivery and unpacking