Calculating The Weight Of Your Disk Array Configuration - HP StorageWorks XP10000 Disk Array Site Prep Manual

Calculating the weight of your disk array configuration
The total weight of your array configuration includes the controller, the disk chassis, plus
the total of all disk drives in each cabinet and any optional components. Your site must
have adequate floor strength to support the total weight of the array, from the delivery
area to the computer room.
Fill in the following weight calculation worksheet to calculate the total weight of your
unpackaged array configuration, in your preferred units (kg or lb). Following the
worksheet is a completed example worksheet.
Use the calculated total weight to estimate the required floor load rating for the computer
room as explained later in this chapter.
Description Quantity
Part Number Weight Total weight
Total weight of your configuration
23
HP StorageWorks XP10000 Disk Array Site Prep Guide