Star Tester; Controls And Indicators - Polaroid ProCam Repair Manual

Controls and Indicators

Table 2-1 lists and describes the controls and indicators of the model 12650-3

STAR Tester.

Table 2-1. STAR Tester Controls and Indicators
Key No. Control and Indicator
1 Disc Position Lamps
2 RESET Pushbutton
3 TEST Selector
4 DISC/RIDE TIME Switch
5 HORN VOLTS Selector
6 20V/2000V Selector
7 VOLT PROBE Jack
8 STOPS ERROR Meter
9 ZLS Meter
10 J4 Connector *
11 DISC DET Cable
Description
Not Used.
Clears electronics between tests.
Selects Test Mode (7000 ZLS, Flash
Exposure, Ambient and Blade Speed
for ProCam.
Selects disc catch or ride time mode
for ProCam.
Selects 5V (Low), 6V (Nom), or
6.8V (High). Simulates film pack
battery voltage.
With VOLT PROBE jack and DC
Voltmeter, allows use of Tester as
Voltmeter.
For checking DC voltages in ProCam
under test, with standard probe.
Digital readout for Ambient, Hybrid,
Strobe Exposure Tests.
Digital readout of Strobe light output
in Zonal Lumen seconds.
For future applications.
Accepts cable from 660 Disc Detect/
Ride Time Fixture.
2 - 4