5. Remove the screws (×6
6. Remove the Glass holder bottom.
7. Remove the screws (×4
8. Remove the Glass holder top.
9. Remove the screws (×8
10. Remove the Glass holders (L, R).
8.22. Remove the Rear cover fix
holders
1. Remove the Glass holders. (See section 8.21.)
2. Remove the screw (×1
3. Remove the Rear cover fix holders (L, R).
).
).
).
each).
8.23. Remove the S-Board
1. Remove the Cabinet assy. (See section 8.20.)
2. Remove the screw (×1
3. Remove the S-Board shield case.
4. Remove the Glass holder bottom. (See section 8.21.)
5. Remove the screws (×2
unit.
6. Disconnect the connector (S2).
7. Remove the Power button.
8. Remove the claw (×1
25
).
) and remove the S-Board
) and remove the S-Board.