Table of Contents
Advertisement
7 Disassembly and Assembly Instructions
7.1.
Remove the rear cover
1. See Service Hint (Section 3)
7.2.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P2, P6, P7, P9, P11, P12 and
P25).
3. Remove the screws (×10
7.3.
Remove the rear terminal cover
1. Remove the screws (×2
2. Remove the rear terminal cover.
) and remove the P-Board.
, ×2
).
7.4.
Remove the Tuner unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A7, A11, A12, A25, A31,
A32, A51, A52).
3. Remove the screws (×4
unit.
7.5.
Remove the GS-Board
1. Disconnect the connector (GS52).
2. Remove the screw (
18
, ×1
) and remove the tuner
) and remove the rear SD bracket.
Advertisement
Table of Contents
