Remote Control Display; Features - Rinnai ASPIRATION RHFE-750ETR Operation & Installation Manual

ABOUT YOUR NEW ASPIRATION SPACE HEATER

REMOTE CONTROL DISPLAY

23
MAIN DISPLAY
Displays current Clock, Timer or
Temperature status.
24
MAIN DISPLAY MODE
Indicates that controller is in Time
or Temperature display modes.
25
CLOCK SET INDICATOR
Displays when the Clock Set mode
is selected.
26
TIMER 1 INDICATOR
Displays to indicate current status
of Timer 1.
27
TIMER 2 INDICATOR
Displays to indicate current status
of Timer 2.
28
LOCK INDICATOR
Displays when the Lock mode is
activated.

FEATURES

• Room Sealed: Air for combustion is taken from the outside and the flue products are exhausted
to the outside. This means heater operation has no effect on the composition and quality of air
in the room.
• Push Button Ignition: Only one touch of the STANDBY/ON switch is all that is required to
operate the heater.
• Lock: When the Lock function is activated all controls other than the STANDBY/ON switch will
be locked. Deactivating the lock releases the controls. If the lock is activated when the appliance
is in STANDBY, all functions will be locked.
• Memory: The heaters micro-computer records preset temperatures, timer programming, and
operational modes. Even in the event of a power failure, the need for reprogramming is
minimised.
• Dual Timer: The Dual Timer allows you to program the appliance to operate for two separate
periods each day. Once programmed the heater can then be controlled by selection of the Timer
1 and or Timer 2 functions.
The Dual Timer feature means that you can "Set and Forget" your heater. It will turn itself ON
or to STANDBY at the times you have programmed until you cancel the Timer program.
• Pre-Heat: This function automatically operates the appliance before the programmed ON time
of the Timer, in order to heat a room to the pre-set temperature by the programmed ON time.
• Remote Control: Full function cordless remote for the convenience of operating the heater
from a distance.
• Auto-Off Function: The Auto-Off function is an energy saving feature designed to control the
room temperature economically. If the room temperature continues to rise when the heater is
thermostatically turned down to its lowest setting the front burner will turn off leaving only the
pilot flame operating. When the room temperature requires further heating the heater will
automatically re-ignite to warm the room.
Rinnai
29
28 30
23
24
25
26
27
3
31 29
OVERRIDE INDICATOR
Displays when Override has been
30
AUTO OFF INDICATOR
Displays when Auto Off has been
31
FLAME INDICATOR
Displays current flame picture setting
when Flame mode is activated.
32
32
TRANSMISSION SIGNAL
Displays when data is transmitted.
selected.
selected.
Operation Manual