Table of Contents
Advertisement
Main Menu
Table of Contents
Replacing a Headlight Bulb
The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch off
and the key removed. Because of
this, you should not attempt to
examine or change a low beam
headlight bulb yourself. If a low
beam headlight bulb fails, take the
vehicle to your dealer to have it
replaced.
Halogen bulbs are used for the high
beam headlight bulbs. When
replacing a high beam headlight bulb,
handle it by its base, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
NOTICE: Halogen headlight bulbs get
very hot when lit. Oil, perspiration, or a
scratch on the glass can cause the bulb
to overheat and shatter.
1.
Open the hood.
Remove the electrical connector
2.
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
3.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
4.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Maintenance
Lights
CONTINUED
153
Advertisement
Chapters
Table of Contents
