Sharp TM150 Service Manual page 9

4. FUNCTIONS
4-1. DEFAULT SETTING
SPST can restore the factory settings.
This function
1. Deletes all user data in the file system;
2. Restores all WAP settings to default; and
3. Restores the values set by the user to default;
(MEP_LOCK settings and the destination and operator name do not change.)
<Operation>
1) Set the COM port on the SPST initial screen and click "Default Set".
2) Click "Yes" to proceed. Click "No" to exit.
TM150
3) Click "Yes" to back-up the MEPLOCK data. Click "No" to restore
default settings.
TM150
4) Communication starts.
5) The following appears when you select "Yes" in step 3 and
MEPLOCK data exists. Click "Yes" to restore the data.
TM150
6) After the handset is turned on, the initialization is complete.
TM150
CONFIDENTIAL
4-2. USER DATA BACK-UP
SPST saves all the data stored on the handset.
1. Set the COM port on the SPST initial screen and click
2. Specify the file name in the following dialog box and click "Save"
3. The communicating dialog box appears while processing.
4. When completed, the following message appears. Click "OK".
4-3. USER DATA RESTORE
SPST completely restores the backed up data.
1. Set the COM port on the SPST initial screen and click "User Data
2. Specify the file name in the following dialog box and click "Save".
TM150 ADJUSTMENTS, PERFORMANCE CHECK, AND FIRMWARE UPGRADE
2 – 3
DRAFT
"User Data Back-up".
TM150
Restore".