Sharp TM150 Service Manual page 8

Buttons
Default Set Refer to "4-1. Default setting".
User Data Back-up Refer to "4-2. User data back-up".
User Data Restore Refer to "4-3. User data restore".
Downloader Refer to "4-4. Downloader".
RF Calibration & Check Refer to "4-5. RF calibration & check".
RF Test Refer to "4-6. RF test tool".
User Password Reset Refer to "4-7. Password reset".
Performance check Refer to "4-8. Performance check and adjustment".
adjustment
**** mode release Refer to "4-9. ****mode release".
Exit End SPST.
3. ADJUSTMENTS FOR TM150
1. Adjustments are required after replacing the following parts. ( F )
Temperature adjustment
Parts
TH101
TH701
Main display unit
Camera unit
When replacing other parts in the RF section, carry out RF calibration.
2. Click the buttons on the SPST screen for adjustments.
To abjust the device, click this button
RF calibration
(Performance check adjustment).
CONFIDENTIAL
Temperature adjustment
(Camera)
u
F
u
u
TM150 ADJUSTMENTS, PERFORMANCE CHECK, AND FIRMWARE UPGRADE
DRAFT
Main display
(Battery) flicker adjustment
F
u
u
u
3. The following screen appears.
1 Temperature adjustment (Camera section)
2 Temperature adjustment (Battery section)
3 Main display flicker adjustment
4 External display contrast adjustment
5 White defect correction
6 Black defect correction
2 – 2
White defect correction
u u
u u
u
F
u
F
1
2
3
4
5
6