Tuner Set - JVC HR-XVC33UM Instructions Manual

Filename [XVC33UM_06Index.fm]
XVC33UM_01.book Page 26 Monday, August 4, 2003 7:24 PM
26
EN

Tuner Set

Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
INFORMATION
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be
displayed on the right side of "BAND" on the Tuner Set
screen.
Page 26
INITIAL SETTINGS (cont.)
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Turn on the unit.
Press POWER (1).
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C
Access the Main Menu screen.
Press SET UP MENU.
D
Access the Tuner Set screen.
Press rt to move the
highlight bar (arrow) to
"TUNER SET", then press OK
or e.
E
Perform Auto Channel Set.
Press rt to move the
highlight bar (arrow) to
"AUTO CHANNEL SET", then
press OK or e. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
When Auto Channel Set is
complete, "SCAN
COMPLETED" appears on the
TV screen.
If the scan was unsuccessful,
"SCAN COMPLETED–NO
SIGNAL–" appears on screen.
Check the connections and start
again.
F
Return to the normal screen.
Press SET UP MENU.
Masterpage:Left+
4 August 2003 6:42 pm