Table of Contents
Advertisement
Symptom
The DVD+VCR does not
start playback.
Video tape cannot be
inserted.
No Hi-Fi sound
The remote control does
not work properly.
Camcorder image is not
shown.
Camcorder image via AV
input to DVD+VCR is not
shown on TV screen.
Timer recording is not
possible.
Cause
•
No disc is inserted.
•
No tape is inserted.
•
An unplayable disc is inserted.
•
The disc is placed upside down.
•
The disc is not placed within the
guide.
•
The disc is dirty.
•
Is the cassette compartment empty?
•
Audio mode is not set properly.
•
There is an obstacle in the path of
the remote control and this unit.
•
The batteries in the remote control
are exhausted.
•
The remote control is not pointed at
the remote sensor of the DVD+VCR.
•
The remote control is too far from the
DVD+VCR.
•
This remote control use the same
buttons for VCR and DVD functions
(ex. PLAY).
•
Camcorder is off.
•
DVD+VCR SOURCE SELECT is not
set to LINE1 or LINE2.
•
Clock in DVD+VCR is not set to cor-
rect time.
•
Timer has been programmed incor-
rectly.
•
indicator light does not appear
after programming timer.
Correction
•
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
•
Insert a playable disc. (Check the
disc type and Regional code.)
•
Place the disc with the playback side
down.
•
Place the disc on the disc tray cor-
rectly inside the guide.
•
Clean the disc.
•
Eject the tape in.
•
Select STEREO by repeatedly
pressing A.MONITOR on the remote
control.
•
Remove the obstacle.
•
Replace the batteries with new ones.
•
Point the remote control at the
remote sensor of the DVD+VCR.
•
Operate the remote control within
23 ft (7m).
•
When using a VCR, first press the
VCR button. When using a DVD, first
press the DVD button.
•
Turn camcorder on and operate
properly.
•
Press AUX to select LINE input
channel (LINE1 or LINE2).
•
Set clock to correct time.
•
Reprogram Timer.
•
Reprogram Timer and turn
DVD+VCR off to enable timer.
33
Hide quick links:
Advertisement
Table of Contents
