Monitor Set (Dvd Deck); Language Set - JVC HR-XVC32SUJ Instruction Manual

Initial Settings (continued)

Monitor Set (DVD deck)

You can select the monitor type depending the TV used
when you playback DVD VIDEO disc recorded for wide-
screen TVs.
• Turn on the TV and select the VCR channel (or AV
mode).
• Slide the TV/VCR/DVD switch on the Remote to the
right.
~
Select the DVD deck.
Press DVD on the Remote so
that the DVD indicator lights up
on the front display panel.
Ÿ
Access the DVD Set Up Menu screen.
1 Press SET UP.
2 Press @ #to select "
!
Select the mode.
Press %fi to move the highlight to "MONITOR TYPE,"
then press ENTER.
⁄
Select the mode setting.
Press %fi to select the desired setting, then press
ENTER.
[16:9] (Wide television screen)
For a wide-screen (16:9) TV.
[4:3 LB] (Letter Box conversion)
For a normal (16:9) TV. Displays a wide-
screen picture to fi t the width of the TV
screen keeping the aspect ratio.
[4:3 PS] (Pan Scan conversion)
For a normal (16:9) TV. The picture is
zoomed up to fi lling the screen vertically
and the left and right sides of the picture
are cut off.
@
Return to the normal screen.
Press SET UP.
12
PICTURE
MONITOR TYPE 4:3LB
PICTURE SOURCE AUTO
ON
SCREEN SAVER
AUDIO
FILE TYPE
PICTURE."
16:9
4:3 LB
4:3 PS

Language Set

You can change the language settings manually as
required.
• Turn on the TV and select the VCR channel (or AV
mode).
• Slide the TV/VCR/DVD switch on the Remote to the
right.
On-screen Language Set (VCR deck)
~
Select the VCR deck.
Press VCR on the Remote so that the VHS indicator
lights up on the front display panel.
Ÿ
Access the Main Menu
screen, then select the
Initial Set.
1 Press SET UP to access
the Main Menu screen.
2 Press %fi to move the
highlight bar (arrow) to
"INITIAL SET," then press ENTER.
!
Select the language.
Press %fi to move the
highlight bar (arrow) to
"LANGUAGE," then press
ENTER repeatedly until
the desired language is
selected.
⁄
Return to the normal screen.
Press SET UP.