Pairing Additional Cameras - Lorex LW3400 Series User Manual

Pairing Additional Cameras

The camera(s) included have already been
paired with the monitor. If you have purchased
additional add-on cameras (model# BB311AC1* /
BB351AC1*), OR if your monitor and camera are not
paired up, follow the steps below.
To pair a camera to your monitor:
Place the camera and monitor next to each
1
other. Make sure the camera is plugged in
and turned on.
Press
2
right to select SETUP.
Select Setup
3
Select Pairing
Use the joystick to select the channel you
4
would like to pair the camera to.
Select a
channel to pair
the camera to
If a camera is already connected to
this channel, the new camera will
replace the existing camera.
*Temperature sensors included with accessory cameras
are not supported.
, then move the joystick left or
38