Table of Contents
Advertisement
Filename [MV5S_08Basic TimerDub.fm]
MV5S_00.book Page 29 Wednesday, August 31, 2005 4:55 PM
S
V
™ Timer Programming
HOW
IEW
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
With the S
V
system, timer programming is greatly
HOW
IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
VHS
0 – 9
CANCEL
SHOWVIEW
ENTER
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the S
V
programme screen in step 5. When
HOW
IEW
this happens, set the correct Guide Program number for that station.
TM
(
pg. 83, "S
V
System Setup")
HOW
IEW
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the S
system:
A Perform "S
V
™ Timer Programming".
HOW
IEW
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver's power on.
NOTES:
There may be cases that the S
HOW
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with the S
V
Timer Programming function, the beginning of the
HOW
IEW
second one may be left off the recording.
S
V
Timer Programming is not possible on the discs used
HOW
IEW
exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to "Satellite Receiver Users (DVD
Deck Only)" above.
Page 29Wednesday, 31 August 2005 16:55
V
number.
HOW
IEW
DVD
TIMER
RETURN
CLEAR ( )
V
HOW
IEW
V
Timer Programming function
IEW
Masterpage:Right0
1
Press DVD or VHS to select the deck on which you want to
perform timer programming.
2
For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3
Press SHOWVIEW to access the S
4
Press the number buttons to
enter the S
V
number of a
HOW
IEW
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR (8).
If the number you entered is
invalid, "SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO.
THEN RETRY" appears on the TV screen. Input a valid S
number.
If "GUIDE PROGRAMME IS NOT SET" appears on the TV screen,
set Guide Program numbers manually. (
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel some
of the reserved programmes. (
5
The S
V
number you entered and the matching timer-
HOW
IEW
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
TM
displayed; if not, see "S
V
HOW
IEW
set the Guide Program number correctly.
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"STOP" (To advance/go back the stop time by 30 minutes, press and
hold rt).
"DAILY/WEEKLY" (
pg. 30, "Weekly/Daily Recording")
"VPS/PDC" (
pg. 30, "VPS/PDC Recording")
"REC MODE" (
pg. 27, 28, "Recording Mode")
"NAME" (
pg. 67, "Modify Title Name") (DVD deck only)
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 – 8.
If "PROGRAMME OVERLAPPED" appears on the TV screen, see
page 35.
9
Press TIMER # to engage the unit's timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
To disengage the timer mode, press TIMER # again.
TIMER RECORDING
29
EN
V
screen.
HOW
IEW
SHOWVIEW PRGM
SHOWVIEW NO.
1 2 3 4
DATE
START
STOP
TV PROG
DAILY/WEEKLY
VPS/PDC
REC MODE
NAME
ON
SP
OK
1
2
3
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
4
5
6
THEN PRESS [ENTER]
7
8
9
0
V
HOW
IEW
pg. 83)
pg. 34)
System Setup" (
pg. 83) and
Advertisement
Table of Contents
