Sensor (Registration) Late Jam (Duplex Feed) - Lexmark C93x Service Manual

5057-XXX
Step
9
Check the duplex media inverter clutch for proper
operation.
1. Enter the Diagnostics Menu.
2. Select MOTOR TESTS.
3. Select Printer Motor Test.
4. Select Registrat clutch.
Does the above component make an audible clicking
sound when activated?
10 Check the duplex media inverter clutch for proper
connection.
Is the registration clutch properly connected?
11 Perform a 2 sided print test.
Does the error remain?
12
Perform a 2 sided print test.
Does the error remain?

231.00 Sensor (registration) late jam (duplex feed)

Step
1 Check the media position.
Does the media remain in standard media exit?
2 Check the duplex unit assembly rolls.
Are the duplex unit assembly rolls free of excess wear
and contamination?
2-32
Printer Service Manual
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 11. Go to step 10.
Replace the duplex Replace the
media inverter connection.
assembly.
"Duplex
Go to
media inverter
assembly removal"
on page 4-9.
Replace the duplex Problem solved.
controller card
assembly.
Go to "Duplex
controller card
assembly removal"
on page 4-14.
Go to step 12.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine card
assembly removal"
on page 4-82.
Yes
Remove the media. Go to step 2.
Go to step 3. Clean or replace the
duplex unit
assembly.
Go to
assembly removal"
on page
No
No
"Duplex unit
4-10.