IF AN EXTERIOR LIGHT BURNS OUT
Modifications or repairs
to the electrical system
carried out incorrectly
and without bearing the features
of the system in mind can cause
malfunctions with the risk of fire.
For bulb type and respective power,
see
.
IF A BULB BURNS OUT
fig. 12
92
IN AN EMERGENCY
MAIN BEAM AND DIPPED
BEAM HEADLIGHTS
To replace a halogen bulb:
1) take out the connector A-fig. 12
then the rubber protection B;
2) release the fastening clip C-fig. 13
and remove the bulb D;
fig. 13
3) fit a new bulb, making the tabs
E-fig. 14 on the metal part coincide
with the specific housings on the
headlight dish;
4) refasten the clip, refit the rubber
guard and refit the connector.
fig. 14