To Open The Bonnet - Fiat 600 Owner's Manual

BONNET
This should only be
done when the car is sta-
tionary.
Before opening the bon-
net, check the wind-
screen wiper arms are
not lifted from the windscreen.
fig. 74

To open the bonnet:

1) Pull the lever shown in fig. 74 in
the direction of the arrow.
2) Press tab B as shown in fig. 75.
3) Lift the bonnet and release the
support rod B-fig. 76 from its clip A.
4) Place the tip of the support rod
in recess C of the bonnet.
fig. 75
Important. The bonnet
might fall violently if the
support rod is not posi-
tioned properly.
When the engine is hot,
mind your hands when
working inside the engine
compartment to avoid burning
yourself. Never put your hands
near the fan: it could start up
even without the key in the
switch. Wait until the engine
cools down.
GETTING TO KNOW YOUR CAR
51