Fiat 600 Owner's Manual page 105

2) Remove the flap A-fig. 46 on the
bumper levering with a screwdriver.
fig. 46
fig. 47
104
IN AN EMERGENCY
3) Screw the ring B-fig. 47 down
fully onto the threaded pin that you
will see when you remove the cover.
fig. 48
4) Remove the flap A-fig. 48 on the
rear bumper levering with a screw-
driver in the point shown by the ar-
row and fasten the ring fully B-fig. 49
on the threaded pin which appears
when the cover is removed .
This device is used for towing an-
other vehicle.
fig. 49