Table of Contents
Advertisement
Display example for XM main screen
Changing the Display
• If
you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Storing Channel Presets
1
After selecting a desired band, touch
(~)
area to
display the preset channel list.
2
Touch and hold anyone of the preset stations
(1 through 6) for at least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or
SIRIUS-1, SIRIUS-2
and
SIRIUS-3 ).
• You cannot use "0", "S".
"r
or "F"forthe ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
1
While receiving SAT Radio, touch NO. [ ... ] or
[~
] to
select channel "0" for XM and channel "0" or "255"
for SIRIUS.
The unit displays the 10 number.
2
To cancel the
10
number display, change the
channel.
Auxiliary
Data Field
r - - - - - - - - - ,
*
1
Ch name
Category
Tille name
Artist name
The information
display
changes when
the area is
touched while
displayed.
*1
If
all ofAuxiliary Data Field Characters cannot be displayed, touch
the Information area
to
display the other characters.
InXMmode:
Touch the Information area in the XM or SIRIUS mode.
Each time you touch this area, the display changes as shown
below.
C~): Displays the preset number*fchannel number
Touching this area will display the list screen of preset stations.
Text infonnation, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text infonnation as explained below.
In SIRIUS mode:
Receiving Stored Channels
Ch name
Category
Title name
Artist name
Title name
Composer name""
Category
Title name
Artist name
Composer name""
Title name
Artist name
1
After selecting a desired band, touch @ area to
display the preset channel list.
2
Touch anyone of the preset stations (1 through 6)
that has your desired satellite channel in memory.
*2
Displayed when there is a composer name (text information).
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XMRadlo:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 digits number. It is printed on a label found on the
SAT Receiver.
It can also be displayed on the screen of the iXA-W407 in the following
way.
47-EN
Advertisement
Chapters
Table of Contents
