Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Stations; Changing The Display (Hd Radio Mode Only) - Alpine IVA-W505 Owner's Manual

5
Touch [ ], [ ] or [
radio frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
• "DIGITAL" is displayed when a digital radio station is received.
• Refer to "Digital SEEK Setting (HD Radio mode only)" on page 34.

Presetting Stations Manually

1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch [P1/2] to change the function guide.
*
* [P 1/3] is displayed in the HD Radio mode.
3
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
], [ ] to change the

Tuning to Preset Stations

You can tune in the preset stations in memory on each band using the
preset number.
1
After selecting the desired band, touch [P1/2]* to
change the function guide.
* [P 1/3] is displayed in the HD Radio mode.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
The preset station is received.
Changing the Display (HD Radio mode
only)
Text information, such as Station name, Song title, Artist, etc., is
displayed while receiving a digital radio station.
Touch [INFO.] on the HD Radio Tuner mode main
screen.
Each time you touch this button, the display changes as shown
below.
1
Short Station Name *
2
Song title *
2
Artist *
2
Album *
1
* Displays Short Station Name / Long Station Name in the Station
Information Service Data.
2
* Displays Song title / Artist / Album in the main program Service
Data.
Receiving a Multicast (HD Radio mode
only)
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When a radio station multicast is received, the "MULTICAST"
indicator lights.
1
Touch [ ] in the HD Radio Tuner mode.
The program list is displayed.
2
Touch [ ] of the desired program type.
The selected program is received.
3
Touch [ ] or [ ] of PROGRAM on the function
guide.
The sub channel of the received radio station is changed.
1
Long Station Name *
15
-EN