Chevrolet Malibu 2015 Owner's Manual page 229

9-32 Driving and Operating
control. If this happens, the cruise
control will automatically disengage.
See Traction Control/Electronic
Stability Control on page 9-29. If a
collision alert occurs when cruise
control is activated, cruise control is
disengaged. See Forward Collision
Alert (FCA) System on page 9-34.
When road conditions allow you to
safely use it again, cruise control
can be turned back on.
If the brakes are applied, cruise
control disengages.
1
(On/Off): Press to turn the
cruise control on or off. A white
indicator comes on in the instrument
cluster.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
RES/+ (Resume/Accelerate): If
there is a set speed in memory,
press the control up briefly to
resume to that speed or hold to
accelerate. If cruise control is
already active, use to increase
vehicle speed.
SET/ (Set/Coast): Press the
control down briefly to set the speed
and activate cruise control. If cruise
control is already active, use to
decrease speed.
Setting Cruise Control
1
If the button is on when not in
use, SET/ or RES/+ could get
bumped and the vehicle could go
into cruise when not desired. Keep
1
the button off when cruise is not
being used.
1
1. Press to turn the cruise
system on.
2. Get up to the speed desired.
3. Move the control toward SET/
and release it.
4. Remove foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster on page 5-8.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or is pressed, the
cruise control is disengaged without
erasing the set speed from memory.