Legend For Quick Trouble Shooter - Nokia 6230 Service Manual

nokia
C P
ONNECTING EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
Place the opening tool between Antenna and D-Cover.
Use the SRT-6 as a lever to open the clips when
removing Antenna.
A TORX driver can be used to push out the IrDA
Window of its fixing.

9. LEGEND FOR QUICK TROUBLE SHOOTER

This legend is valid for all parts of the Quick Trouble Shooter
Follow the steps until the problem is solved. If this doesn't help, you are not authorized to go forward. Only
underlined components ( e.g. I002) can be changed.
Service Manual 6230/i Level 1&2
PAGE 15 (23)
CONFIDENTIAL
The start point of repair activities regarding the appeared fault symptoms.
Follow the arrows step by step
Pads or contacts: Check optical and mechanical condition particularly regarding
to corrosion. Clean if necessary.
Measure component for electrical functionality and change, if needed.
(Level 2 only)
Pads or contacts: Check optical and mechanical condition particularly regarding
to corrosion. Clean with ESD brush only, if necessary.
No more actions possible send product to the appropriate service partner with
higher service level.
Remove the IHF Speaker by using tweezers.
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
Approved 3.0
DJk
24.01.2005