Nokia 6230 Service Manual page 13

nokia
C P
ONNECTING EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
Remove the C-Cover.
Remove UI-Board...
Use SRT-6 to open the LCD connector. Take care about
components on the Engine Module during this
procedure.
...and the Engine Module.
Service Manual 6230/i Level 1&2
PAGE 13 (23)
CONFIDENTIAL
Place the SRT-6 between C-Cover and UI-Board. Press
the UI-Board as shown in step 1 in the picture above.
Than lift the UI-Board with the opening tool carefully.
...and Metal Frame. Protect the LCD with a film again.
Take away the LCD...
To prevent damages of spring contacts always use a C-
Cover or soldering jig when removing VGA Camera.
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
Approved 3.0
DJk
24.01.2005