4-1 More Advanced Operations
Directly Creating 2D Symbol
You can create 2D symbol not only from a CSV file but also directly from METAZAStudio.
Based on a 2D symbol you create, you can edit the code using METAZAStudio and create another 2D sym-
bol.
Procedure
Start METAZAStudio.
P. 22, "How to Start The Software"
56
Chapter 4 Appendix
If METAZAStudio is running, click
In the [Select Material] dialog box, select the
material of the instrument to be imprinted.
Uncheck the [Use printer driver settings] checkbox
to select a type of material. To use material that is not
included in the list, you can register the material.
P. 59, "Registering a Composition and Adjusting the
Striking Force"
If you use the driver settings without changing them,
check the [Use printer driver settings] checkbox.
Click [OK].
Click
.
.