TRAINING
Body Rear End Panel Replacement
Removal Procedure
1. Disable the supplemental inflatable restraint
(SIR) system.
2. Disconnect the negative battery cable.
3. Remove all related panels and components.
4. Repair as much of the damage as possible to
factory specifications.
5. Note the location and remove the sealers and
anti-corrosion materials from the repair area, as
necessary.
Do not damage any inner panels or rein-
Note
forcements.
6. Locate and drill out all factory welds. Note the
number and location of the welds for installation
of the front lower rail.
7. Remove the damaged rear end panel.
24
© 2008 General Motors Corporation. All rights reserved.
Body