Table of Contents
Advertisement
Resuming playback
The unit can memorize the position on a disc where you interrupt
playback, and resume playback from that position later.
There are three resume modes; ON, OFF and DISC RESUME.
The mode is initially set to ON when you purchased the unit.
• You can select the mode using the preference display (see
page 39).
When the resume mode is "ON"
When you press 7, the unit stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD/VR
format discs).
The memory of the interrupted position is not cleared if you turn
off the unit.
When you turn off the unit after setting the resume function,
simply press 3. The unit is turned on, and playback starts from
the interrupted position. If you turn on the unit by pressing
then press 3, playback starts from the beginning of the disc.
Note that the memory is cleared if you open the disc tray.
When the resume mode is "DISC RESUME"
When you press 7, the unit stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD discs).
The memory of the interrupted position is not cleared if you open
the disc tray or turn off the unit.
Hint
The unit memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
To clear the memory
Press 7 while the disc is stopped.
To resume playback
When the resume mode is "ON"
While the disc you interrupted playback is
still on the disc tray, press 3.
The unit resumes playback from the position where playback
was interrupted. The TV screen and the display window show
[RESUME PLAY].
To play back from the beginning
Press 7 before pressing 3 to start playback.
When the resume mode is "DISC RESUME"
1
Press 0 to insert a disc for which the unit has
stored an interrupted position.
The TV screen shows [RESUME STOP].
2
Press 3.
The TV screen and the display window show [RESUME
PLAY] and the unit resumes playback from the position
where playback was interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3 to start
playback.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
"resuming" position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
• For a double-sided DVD AUDIO/DVD VIDEO disc, the unit
regards each side as a different disc. Therefore, to resume
playback of such a disc, the disc must be inserted with the
same side down.
• When the unit memorizes an interrupted point for a disc, it also
memorizes Audio, Subtitle and Angle settings.
• The unit may not resume playback exactly from the interrupted
point. In the case of an SVCD/Video CD disc with PBC function,
the unit may resume playback from a point slightly earlier or
later than the point where playback was interrupted.
Basic operations
13
Advertisement
Table of Contents
