V Fasten the wire harness with the
plastic band. The buckle and the
end of the plastic band should
not be between the wire harness
and the shroud.
W Fasten the wire harness and fuel
tank breather hose together with
the clip. The open ends of the
clip should face inward.
X Fuel hoses
Y Fasten the wire harness and fuel
tank breather hose together with
the clip. The open ends of the
clip should face upward.
Z Place the end of the plastic band
between the frame cross mem-
ber and fuel tank.
CABLE ROUTING
9-41
SPEC