Yamaha RS90K Service Manual page 377

Parts to be tightened
Rear axle
Rear axle
Set bolt (front axle)
Speed sensor
Bearing holder
Gear unit (speed sensor)
*: ESSO beacon 325 grease or Aeroshell grease #7A
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12.0 m · kg, 85 ft · lb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 m · kg, 43 ft · lb).
TIGHTENING TORQUE
Tightening torque
Nm m · kg ft · lb
75 7.5 54 (RS90/RS90R/RS90M/RST90/
RST90TF)
80 8.0 58 (RST90TF)
9 0.9 6.5 Apply LOCTITE
20 2.0 14
20 2.0 14
40 4.0 29
9-24
SPEC
Remarks
®