Checking The Sampling Frequency And Quantization Bit Length - JVC XV-N510B Instructions Manual

To dismiss the VFP mode selection window
Press VFP - PROGRESSIVE SCAN.
NOTES
• The window for VFP mode selection and parameter setting
disappear if no operation is made for about 10 seconds.
• Simply press the VFP - PROGRESSIVE SCAN button, and do
not hold it down for a few seconds; otherwise the Progressive
scanning mode will be changed, if the VIDEO SIGNAL
SELECTOR on the rear of the player is set to "REMOTE."
To simulate surround sound (3D PHONIC)
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
1
During playback, press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
2
Press 2/3 to select the desired mode.
Each time you press the button, the 3D PHONIC mode
changes as follows:
ACTION DRAMA
ACTION + 5 4
Selected effect mode
• ACTION
Suitable for action movies and sports programs in which the
sound source moves.
• DRAMA
Natural and warm sound. You can enjoy movies in a relaxed
mood.
• THEATER
You can enjoy sound effects like in a theater.
3
Press 5/∞ to adjust the effect level.
You can set the effect level from [1] to [5].
The higher value enhances the effect.
To dismiss the 3D PHONIC window
Press 3D PHONIC.
NOTES
• The 3D PHONIC window disappears if no operation is made for
about 10 seconds.
• The 3D PHONIC function works correctly only when playing
back a DVD VIDEO disc recorded with Dolby Digital.
• When playing back a DVD VIDEO disc recorded with Dolby
Digital that does not contain the rear signal, you can change the
3D PHONIC setting, but you will not be able to achieve a correct
3D effect.
• The 3D PHONIC function does not affect the Dolby Digital
bitstream signal from the DIGITAL OUT jack.
• When the 3D PHONIC function is active, the [ANALOG OUT]
setting in the [AUDIO] setting display is not available.
• When one of the 3D PHONIC modes is activated, the [3D]
indicator lights up in the display window.
THEATER NONE
Checking the sampling frequency and
quantization bit length
You can check the sampling frequency and quantization bit
length of digital audio during playback.
During playback, press and hold down
AUDIO - fs/Rate for a few seconds.
The sampling frequency and quantization bit length of the
current digital audio are shown in the display window
temporarily. When the audio is recorded using a surround
audio format, the sampling frequency and quantization bit
length are shown for the front speakers.
(Example)
Quantization bit length
The sampling frequencies indicated are as follows:
44.1, 48, 88.2, 96, 176.4, and 192 (kHz). Note that any figure
below the first decimal place is omitted in the display window.
NOTES
• With some discs, [NO INFO.] may appear instead of the
sampling frequency and quantization bit length.
• The sampling frequency and quantization bit length cannot be
displayed with VR format discs.
Sampling frequency
23