Table of Contents
Advertisement
Configure | Settings
Set languages
The LCD language is preset to English.
You can select English, French or Spanish
to be used in all screen displays.
1. Press MENU/SELECT in idle mode.
2. Press q CID or p DIR to highlight
Settings, then press MENU/SELECT.
3. Press MENU/SELECT to select LCD
language.
4. Press q CID or p DIR to choose
English, Français or Español, and then
press MENU/SELECT.
NOTE
• If you accidentally change the LCD
language to French or Spanish, you
can reset it to English easily by pressing
MENU/SELECT then entering:-
364
Set voice language
The voice prompt language is preset to
English. You can select English or French
to be used for the voice prompts in your
answering system.
1. Press MENU/SELECT in idle mode.
2. Press q CID or p DIR to highlight
Settings, then press MENU/SELECT.
3. Press q CID or p DIR to highlight
Voice
language,
then
MENU/SELECT.
4. Press q CID or p DIR to choose
English or Français, and then press
MENU/SELECT.
106
Set date and time
NOTE
• Make sure you set the date and
time including the year correctly;
otherwise the answering system
does not announce the correct
day of the week for your recorded
messages time stamp.
1. Press
MENU/SELECT
phone is not in use.
press
2. Press q CID or p DIR to choose
Set date/time, and then press
MENU/SELECT to select.
3. Use the dialing keys (0-9) to enter
the month (MM), date (DD) and year
(YY). Then, press MENU/SELECT to
move on to set the time.
4. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then,
press q CID or p DIR to choose AM
or PM.
5. Press MENU/SELECT to save.
Use caller ID to automatically
set date and time
If you subscribe to caller ID service,
the day, month and time are set
automatically with each incoming call.
Follow the steps, as mentioned below,
to turn the CID time sync feature on or
off. The default setting is On.
when
the
1. Press
MENU/SELECT
phone is not in use.
2. Press q CID or p DIR to scroll
Settings,
to
and
MENU/SELECT.
3. Press q CID or p DIR to scroll
to CID time sync, and then press
MENU/SELECT.
4. Press q CID or p DIR to highlight
On or Off, then press MENU/SELECT
to save. There is a confirmation
tone and the screen returns to the
previous menu.
107
when
the
then
press
Advertisement
Table of Contents
