Folding Horizontal Skew Adjustment (For B804 Only) - Ricoh G179 Service Manual

2. Guide plate [A].
Stay [B] (  x4)
3.
Left plate [C] (  x4)
4.
Sensor bracket [D] (  x1)
5.
Stack present sensor [E] (S32) (  x1)
6.
1.4.5 FOLDING HORIZONTAL SKEW ADJUSTMENT (FOR B804
ONLY)
The fold unit is adjusted for optimum performance before the finisher is shipped
from the factory. Do this adjustment only if the edges of folded booklets are not
even.
1. Switch the copier on and enter the SP mode.
2. Europe, Asia: Use SP6-134-001 (this is for A3 paper). North America: Use SP6-134-005
(this is for DLT paper).
If the original setting of SP6-134-001 or -005 is not "0", then you must do the
vertical skew adjustment (
finish this horizontal skew procedure.
Use the 10-key pad to input "-2" (mm) for the SP value. (Press  to enter the minus
3.
sign.)
4. Press [#] then exit the SP mode.
B804/B805
CÓPIA NÃO CONTROLADA
1.4.6 "Fold Vertical Skew Adjustment") after you
14
CÓPIA NÃO CONTROLADA
Fold Unit
SM