No.
Test Pattern
9
Argyle Pattern Small
10
Argyle Pattern Large
11
Independent Pattern (1-dot)
12
Independent Pattern (2-dot)
5.26.2 SMC PRINT OUT LISTS: SP5-990
1.
Open SP mode 5-990.
SMC (System Parameter and Data Lists)
1
All Data List
2.
Press the "EXECUTE" button on the operation panel.
3.
Select "Single" or "Both".
4.
After printing the list, press the "Escape" button to return to the SP mode display.
5.26.3 NIP BAND WIDTH CHECK: SP1-109
When paper wrinkling or image offset occurs, the pressure from the pressure roller can be
adjusted by changing the position of the pressure springs. At this time, the nip bandwidth
can also be checked with SP1-109.
1.
Execute SP5-802 to perform a free run of about 50 sheets.
2.
Open SP1-109-1, press "OK" button, and then press "Yes" to confirm the selection.
SM
CÓPIA NÃO CONTROLADA
No.
22
23
24
5-153
CÓPIA NÃO CONTROLADA
Using SP Modes
Test Pattern
Two Beam Density Pattern
Full Dot Pattern
All White Pattern
G179