Detecting Skewed Documents - Canon imageFORMULA DR-M1060 User Manual

Buttons of Buttons of
[Rapid Recovery Operating
System] Screen Panel
[SAVE &
DFR button
CONTINUE]
[STOP] Stop button
[DISCARD &
Start button
CONTINUE]

Detecting Skewed Documents

This scanner includes a function that can detect when a document has
been fed at a slant. When this function is used, the scanner will stop a
scanning operation automatically when it detects a skewed document
that exceeds a fixed angle, thereby preventing damage to the
document.
This function is useful for documents that are 148 mm (5.9") or larger
in width.
To use the skew detection function, open the scanner driver settings
screen and enable the skew detection function beforehand.
Setting procedure
1
Open the scanner driver settings screen.
2
Click the [Feeding] tab.
Description
Saves the preview image as a
scanned image and scans the
rest of the document.
Discards the preview image and
stops scanning.
Discards the preview image and
continues scanning. Place the
double fed document again
before clicking this button.
(See p. 50)
3
Select the [Skew Detection] check box.
4
Click the [OK] button to close the settings screen.
5
Place the document as described in
Documents" (see p.
IMPORTANT
When this function is enabled, small documents and documents
that have been placed to the left or right of the center of the feed
inlet may be detected as skewed, and the scanning operation
may stop. Place documents in the center of the feed inlet, or
disable the skew detection function.
32
"Placing
25).