Fuel Level Gauge - Yamaha WaveRunner GP800R Service Manual

– +
ELEC
YAMAHA
8
MPH
7
6
5
4
3
2
RESET 1
x1000r/min
YAMAHA
8
MPH
HOUR
7
6
5
4
3
2
1
x1000r/min
5 4
INDICATION SYSTEM
FUEL
HOUR
MULTI
DISPLAY
WARNING
FUEL
MULTI
DISPLAY
WARNING
6

Fuel level gauge

1. Check:
Fuel level gauge
Not operating → Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the oil tank, connect the
blue and black terminals (white two-pin
connector) with a jumper lead 1 to prevent
the oil warning indicator from being acti-
vated.
Checking steps:
Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
Disconnect the green two-pin connec-
tor (white/blue and black leads).
Connect the white/blue and black ter-
minals with a jumper lead 2.
Connect the green and red terminals
with a jumper lead 3.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
Check the fuel level segments is full
indicated.
Remove the jumper lead 2 from the
green two-pin connector.
Disconnect the jumper lead 3 and
then connect it to green and red ter-
minal again.
Make sure the fuel level segment 4,
fuel symbol 5 and "WARNING" lamp
6 blinks, and the buzzer sounds inter-
mittently.
7-33
E