Spark Plugs; Spark Plug Caps; Ignition Coil - Yamaha WaveRunner GP800R Service Manual

Hide thumbs Also See for WaveRunner GP800R:
Table of Contents

Advertisement

+
ELEC
IGNITION SYSTEM
3. Measure:
Pickup coil output peak voltage
Below specification → Replace the
pickup coil.
Pickup coil output peak voltage:
White/red (W/R) –
White/black (W/B)
Unloaded
r/min
Cranking
V
5
Test harness (8-pin):
YW-06779/90890-06779

SPARK PLUGS

Refer to "POWER UNIT" in chapter 3.

SPARK PLUG CAPS

1. Inspect:
Spark plug cap
Loose → Tighten.
Cracks/damage → Replace.

IGNITION COIL

1. Measure:
Primary coil resistance
Out of specification → Replace.
Primary coil resistance:
Orange (O) – Black (B)
0.078–0.106 Ω at 20 ˚C (68 ˚F)
NOTE:
When measuring a resistance of 10 Ω or
less with the digital tester, the correct mea-
surement cannot be obtained because of
the tester's internal resistance.
Refer to "Low resistance measurement".
7-12
E
Loaded
2,000
3,500
3
7
11

Advertisement

Table of Contents
loading

Table of Contents