Fuse; Battery; Rectifier/Regulator Peak Voltage; Lighting Coil Peak Voltage - Yamaha WaveRunner GP800R Service Manual

Hide thumbs Also See for WaveRunner GP800R:
Table of Contents

Advertisement

+
ELEC
1
CHARGING SYSTEM
1

FUSE

Refer to "STARTING SYSTEM".

BATTERY

Refer to "ELECTRICAL" in chapter 3.
RECTIFIER/REGULATOR PEAK
VOLTAGE
1. Measure:
Rectifier/regulator output peak
voltage
Below specification → Measure the
lighting coil output peak voltage or
replace the rectifier/regulator.
Rectifier/regulator output peak
voltage:
Red (R) – Black (B)
r/min
Cranking
V
7.5
NOTE:
Make sure the output lead (red lead) 1 of
the rectifier/regulator is disconnected when
measuring the output peak voltage.

LIGHTING COIL PEAK VOLTAGE

1. Measure:
Lighting coil output peak voltage
Below specification → Replace the
lighting coil.
Lighting coil output peak voltage:
Green (G) – Green (G)
Unloaded
r/min
Cranking
V
8.5
NOTE:
Make sure the output lead (red lead) 1 of
the rectifier/regulator is disconnected when
measuring the output peak voltage.
7-23
Unloaded
2,000
3,500
12.5
12.5
Loaded
2,000
3,500
8.5
13
13
E

Advertisement

Table of Contents
loading

Table of Contents