Table of Contents
Advertisement
5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D RANGE CONTROL
OUTPUT LEVEL
SELECT
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER
DIGITAL AUDIO OUTPUT options
6
Press 5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the unit to an
external surround decoder or D/A converter. (If you do not
connect the unit to such a device, you do not have to set this
item.)
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a DTS decoder, select [STREAM/
PCM].
• When connecting to other digital device, select [PCM
ONLY].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP
display appears.
To change the brightness of the display window
Press DIMMER on the remote control unit.
You can select the display window brightness from three levels.
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY PROLOGIC
DOLBY DIGITAL/PCM
STREAM/PCM
ON
Basic playback
Inserting discs
1
Press 0 (open/close) on the right of the disc
tray you want to open.
2
Place a disc in the disc tray.
IV E
SS
RE
O G
PR
• To insert an 8-cm disc, place it in the inner recess.
3
Press 0 (open/close) located on the right of
the disc tray.
Hint
You can insert or remove the disc by pressing 0 (open/close) for
a disc tray which is not in use for playback while a disc in the
other tray is being played, without interrupting playback.
Using the OPEN/CLOSE button on the remote
control
You can open and close the disc trays by using the OPEN/
CLOSE button on the remote control in the following ways.
To open the current disc tray
In stop mode, press OPEN/CLOSE, and the current disc tray
opens.
• To check the current disc number, press ON SCREEN to bring
up the status bar (see page 11).
To remove the disc currently being played
During playback, press OPEN/CLOSE, and the disc tray
containing the disc currently being played opens.
To open the desired tray that contains a disc
1 Press DISC SELECT.
2 Press the numeric buttons (1 to 5) to designate the disc tray
you want to open.
3 Press OPEN/CLOSE.
NOTES
• You cannot use DISC SELECT and the numeric buttons to open
the disc tray whose disc indicator is not lit.
• If you use DISC SELECT and the numeric buttons to designate
a disc tray, or press 0 (open/close) for a disc tray which is not in
use for playback while another disc tray is open, the disc tray
will be closed.
Basic operations
With the label side up
9
Advertisement
Table of Contents
