To Resume Playback - JVC XV-M50BK Instructions Manual

To resume playback

7 While the disc you interrupt playback last time is still in the disc tray.
Press 3.
The unit starts playback from the position where you interrupted playback last time.
• To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray.
*Press any one of the DISC (1 through 3) buttons on the front panel.
*Press 7 while stopped.
*Turn on the unit by pressing DVD STANDBY/ON
NOTES
• The resume function does not work with Audio CD discs.
• The resume function does not work if
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
• The resume function does not work in the program or random mode.
(on the remote control) or
" "
RESUME" on the SYSTEM" page of the preference display is set to
Basic operations
(on the front panel).
"
OFF" .
23