Advertisement
FOR ROOM COOLING
•
Turn the product OFF at the MAINS SWITCH and remove the plug from the mains
socket.
•
Open the top cover and pour clean water into tank. Additionally, if required, add
some ice cubes.Then connect to the power supply and turn on the MAINS
SWITCH.
•
Press the POWER button and the fan will start at medium speed, after a few
seconds, it will switch to LOW speed.
•
To turn the product OFF press the POWER button again. If you do not intend to
use the product for some time empty the water tank.
•
Press the SPEED button to increase or decrease the speed.
•
Press the MODE button to select the COOL MODE, indicated by the LED. The full
effect of this mode will begin after about 3 minutes.
•
Press the Sleep Function with indicator on, it will run with a cycle 5 seconds high, 5
seconds medium and 5 seconds low and stop for 4 seconds and it will repeat the
same cycle again.
•
Once all the water in the tank has been used turn the product OFF and refill the
water tank.
•
To empty the water tank turn your product off at the POWER button and MAINS
SWITCH. Carefully pull the tank from the main body and dispose of the water.
Refit the tank correctly or your evaporative cooler will not work correctly.
EXTRA HUMIDIFICATION
•
Humidifier located under the top cover.
•
Turn the humidifier anti-clockwise for additional humidification to low and high
humidification.Turn clockwise to switch off this function.
4
Hide quick links:
Advertisement
