Removing Lower Apron Assembly - Polaroid 636 restyle Repair Manual

Repair Manual Addendum
7. Open the 636 restyle camera film door by pushing its release button forward. The film door
drops down to its open position (Figure 2-6).
8. Using a dental pick or a small flat screwdriver, remove the lower apron assembly as follows:
• Insert the dental pick or the small flat screwdriver behind the plastic body tab - between
plastic body tab and lower apron locking tab (Figure 2-7) - at the non-gear side of the lower
apron assembly.
• Gently push in or twist the dental pick or small flat screwdriver to release the lower apron
locking tab being careful not to scratch or damage the lower apron assembly.
• Gently pull out the non-gear side of the lower apron assembly to release it.
• Repeat this procedure to release the gear side of the lower apron assembly.
• Lift out the lower apron assembly.
Film Door
Figure 2-7. Removing lower apron assembly
Front
Hand Strap
Lower Apron
Plastic Body
Tab
9
Disassembly/Reassembly
Assembly