Getting Started; Connections; Before Making Any Connections; To Connect To A Tv - JVC XV-515GD Instructions Manual

Getting started

Connections

*In the following despription, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)
The unit
VIDEO OUT
VIDEO S-VIDEO
NTSC
PAL
AUDIO OUT
LEFT
RIGHT
Yellow
Red
White
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts
stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-
video cable in addition to the (standard) video connection to get better picture quality.
The unit is compatible with the PAL and NTSC color systems. Set the PAL/NTSC switch on the rear panel to match the
color system of your TV. Make sure that the color system of the DVD/Video CD/SVCD disc labeled on the package
matches your TV.
NOTE
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
AV COMPU LINK
PCM/STREAM
OPTICAL
DIGITAL OUT
Audio/video cable
(supplied)
* If the TV has an AV COMPU LINK terminal,
see "AV COMPU LINK remote control system"
on page 39.
S-video cable
(supplied)
TV
IN
Yellow
White
Red

Getting started

S-VIDEO
VIDEO
LEFT
AUDIO
RIGHT
12