Table of Contents
Advertisement
D8 (Red color) (D2) :
When the +3 V source provides to the CN17 on the CN-1148 board, this LED lights.
D9 (Red color) (B2) :
When the +3 V source provides to the CN18 on the CN-1148 board, this LED lights.
D10 (Red color) (A2) :
When the +3 V source provides to the CN19 on the CN-1148 board, this LED lights.
D11 (Red color) (A2) :
When the +3 V source provides to the CN20 on the CN-1148 board, this LED lights.
D12 (Yellow color) (C1) :
When the +12 V source provides to the CN13 through CN20 on the CN-1148 board, this LED lights.
D13 (Green color) (C1) :
When the +5 V source provides to the CN13 through CN20 on the CN-1148 board, this LED lights.
3. KY-318 Board
S1 (C1) : Board ID Setting Switch
Set this switch as follows depending upon the M/E row position in which the KY-318 board is installed.
Normally, use the default settings when shipped from the factory.
Factory settings :
Row position
M/E-1
M/E-2
M/E-3
P/P
DVS-7000AE IM
S1
(Component Side/A Side)
KY-318 board
Ch.1
Ch.2
OFF
ON
ON
OFF
OFF
OFF
ON
ON
5-1. Switch Settings on Boards and LEDs Description
CN5
5-9
Advertisement
Table of Contents
