Sony DVS-7000A Installation Manual page 69

3. Installation to Main Panel (BKDS-7011R/7011LR)
(1) Open the panel. (Refer to "4-4-1. Opening and Closing of Panel".)
(2) Turn off the power switch in the control panel. (Refer to "4-4-2. Turning On/Off the Power Switch".)
(3) Remove the blank panel.
(Refer to the step (3) of "1. Installation to Main Panel (BKDS-701x)" in the section 4-4-5.)
(4) Put option panel to the position with removed the blank panel at the step (3) and secure it by the
supplied four screws (PSW3 x 8).
Option panel
PWH3 x 8
PWH3 x 8
(5) Disconnect the harness of the CN18 on the CN-1143 board and replace it option panel CN1, and
secure it with harness clamper.
CPU-191 board
Clanp
CN1143 board
DVS-7000AE IM
PWH3 x 8
PWH3 x 8
CN7
CN18
4-4. Installation of Options for Control Panel
Option panel
4-25