Table of Contents
Advertisement
4-3. Installation of Options for DVS-7000A
Removal
(3) Open the eject levers of the plug-in board in the direction of the arrows 1.
(4) Pull out the plug-in board from the unit.
n
Pull out the plug-in board with a equal force for both eject levers.
Installation
(5) Insert the plug-in board along the board guide rails while putting the eject levers to the direction of
the arrows 1 as shown in the figure.
(6) Connect the plug-in board to the connector on the mother board by putting the eject levers in the
direction of the arrows 2.
(7) Install the two board retainer and the one board holder in the reverse order of the steps (1) and (2).
Eject lever
1
1
4-8
2
2
Board
Board guide rail
MB-618 board
DVS-7000AE IM
Advertisement
Table of Contents
