Mercury Optimax 115 Service Manual page 274

4. Thermostat and temperature sensor installed.
a -
b -
NOTE: When installing thermostat hoses, secure starboard to port thermostat hose (a)
with sta-straps (b) to prevent hose from being cut by alternator/air compressor belt.
Reinstalling Engine Components
Reinstall the following engine components:
Section 2
Starter Motor
Electronic Control Module
Ignition Coil
Starter Solenoid
Alternator
Flywheel
Section 3
Direct Fuel Injection
Fuel Pump
On-Board Oil Tank
Oil Pump
Section 7
Shift Cable Latch Assembly
Control Cable Anchor Bracket
90-855347R1 JANUARY 1999
Thermostat (143 F 61.7 C)
Overheat Temperature Sensor
a
b
a
56163
POWERHEAD
b
56164
Page 4A-51